Made in the USA
The Larson Electronics SPLT-.6K-LM30-EW-TLR-ISDG-4X100-1XPTZ-4XFE-W4G-M2 Portable Security LED Tower provides a safe and effective way for operators to monitor locations from elevated positions up to 30`. This solar security assembly features a telescoping tower with a removable mast head for storage when not in use. Five outdoor security cameras (one PTZ camera and four fisheye cameras - all NDAA compliant) can be used to record images, supported by a 10TB NVR. Equipped with a health monitoring system and GPS tracking, an included router facilitates wireless access point and cell network connections (6dbi antenna not included). This unit features two 300-watt solar panels (fixed mount), four LED fixtures, 600aH capacity lithium-ion battery bank (same capacity at 1200aH AGM), 4kW backup diesel generator, 120V battery charger and 600-watt inverter.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*
The SPLT-.6K-LM30-EW-TLR-ISDG-4X100-1XPTZ-4XFE-W4G-M2 is a complete, portable solar-powered security LED system for outdoor and remote locations. This unit consists of a 30' telescoping mast with electric winch, two 300-watt solar panels, four LED fixtures, one PTZ camera, four fisheye cameras, siren, wireless router with two SIM card slots, GPS tracking, lithium-ion battery bank, backup diesel generator, battery charger, inverter and solar charge MPPT controller. All components are mounted on a single-axle trailer. This system features a health monitoring system, which closely checks and monitors battery voltage, battery charge, solar panel voltage and more (may require a subscription).
All cameras on this system comply with the 2019 National Defense Authorization Act (NDAA). The regulation bans federal governments, their contractors and businesses with national security interests from buying and using surveillance equipment made by specific major China-based manufacturers, including Hikvision, Dahua and their OEMs. Security products sold by Honeywell, Bosch, Panasonic, ADT, Flir and many more are affected by the ban. NDAA compliance also includes a ban on ZTE, Huawei and Hytera telecommunication equipment.
Operation:
- (2) 300W solar panels w/ solar MPPT charge controller
- (15) 40aH lithium-ion batteries - 600aH total battery bank/600aH usable. This has the same capacity as a 1200aH AGM wet battery system, but with reduced weight and allows for 100% capacity instead of 50% capacity of AGM batteries.
- (4) 100-watt LED fixturesÂÂ
- (1) PTZ camera - NDAA compliant, 32x zoom, 4MP
- (4) 360° fisheye cameras - NDAA compliant, 5MP
- 10TB network video recorder configured in RAID configuration
- Router with (2) SIM card slots - wireless access point or cell network
- 120V battery charger
- 600W, 120V inverter
- Siren with motion sensor
- Blue LED strobe light with day/night operation or motion sensor
- Health monitoring system
- All system components secured to a DOT-approved trailer
- Trailer comes with (4) leveling jacks and vin#
LED Fixtures: The SPLT-.6K-LM30-EW-TLR-ISDG-4X100-1XPTZ-4XFE-W4G-M2 features four, 100-watt LED lights for outdoor illumination. Settings for the LED fixtures include: motion sensor, timer or day/night operation.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
PTZ Cameras: This trailer mounted security system features one PTZ security camera that provide operators with crisp 720p or 1080p full-HD high resolution images. A 4.7-94mm varifocal lens automatically adjusts focus, providing operators with precise 12x digital zoom and 32x optical zoom levels. Integrated long-range IR LEDs, with a wavelength measurement of 850 nm, enable the day/night camera to see distances up to 492` under nighttime conditions. This unit offloads videos in MP4 format and features H.264 and MJPEG video compression.
The IP security camera is designed to perform in outdoor locations and rainy conditions. This IP66-rated unit resists the negative effects of non-corrosive liquids. De-fogging features enable the unit to operate in rainy and foggy conditions. This device is capable of operating in temperatures between -22°F and 149°F.
Our cameras with Power over Ethernet (PoE) features enable data transfers and power to be passed through a single Ethernet cable that is usually a Cat 3/Cat 5 cable or better. There are several types of PoE, which come with their own respective standard and maximum power to port capabilities. The IEEE 802.3af PoE standard, with a voltage range of 44.0 - 57.0V, offers 15.4W of DC power for each port. The IEEE 802.3at PoE standard, with a voltage range of 50.0 – 57.0V, provides up to 30W of DC power per port, which is ideal for surveillance cameras, antennas and network access points. The IEEE 802.3bt PoE standard, with a voltage range of 50.0 – 57.0V, provides 60W of DC power for each port. In order to utilize PoE properly, the components, such as the receiving unit and sending device, must be PoE compliant.
Fisheye Cameras: The security system features four fisheye cameras with 360° of coverage. These cameras can be individually angled to cover specific areas or sides of the tower. The 5MP camera is designed to monitor the trailer and the surrounding area around the trailer.
Network Video Recorder: The solar security assembly comes with a 10TB, 8-channel network video recorder, which operates on Linux-based custom software. Installation only takes minutes via plug-and-play, which automatically detects, displays and configures system components. With multiple recording modes (Schedule, Continuous, Motion Detection and Event), users could capture hours of footage with ease. The remote configurable network recorder features a bit rate of 40Mbps incoming and 80Mbps outgoing at up to 60fps per channel. The 10TB storage is configured in a RAID configuration to prevent data corruption due to drive failure. To maximize storage, the unit supports H.265, H.264, and H.264 OVC video compression. The network recorder is compatible with two-way audio streaming (camera dependent) and includes 9 ethernet ports (RJ-45 interface). During recording, the unit handles the following data: activity log, email notification, event log, event notification, video analytics and event search. This device offloads videos in MP4 format.
NVR Inputs: (1) RCA, 4 Sensor Inputs
NVR Outputs: (1) RCA, (1) VGA, (1) HDMI, (1) USB 2.0 (front), (1) USB 3.0 (rear)
System Devices: The SPLT-.6K-LM30-EW-TLR-ISDG-4X100-1XPTZ-4XFE-W4G-M2 has a 12" monitor, USB mouse, USB keyboard and pull-out vibration tray. Operators can use these devices to configure the NVR recording unit or view recordings locally.
Siren: This unit is equipped with a siren with a motion sensor feature for audio-based notifications or warnings. We can add a one-way or two-way PA system upon request and with additional cost.
Router/Wireless 4G Hotspot: Operators can connect to wireless access points or cellular networks via a professional-grade router with two SIM card slots for load balancing or fail-over service. The unit supports WAN, LAN and Wi-Fi interfaces with 100Mbps throughput capabilities. Recommended for 1-60 users, this device works with all major carriers (CDMA/GSM/LTE). The access point can be disabled for security purposes upon request. Customers must provide a 6dbi antenna for the system (not included).
GPS Tracking: The router is equipped with built-in GPS fleet tracking. This feature enables operators to monitor the location of the solar-powered system easily. Cloud-based management tools enable access to the wireless network from compatible devices.
LED Strobe: The SPLT-.6K-LM30-EW-TLR-ISDG-4X100-1XPTZ-4XFE-W4G-M2 comes with a blue security LED strobe light, which has day/night operation and motion sensor settings. We can add a red or white LED strobe light at an additional cost (combination of colors is also possible).
Surveillance Tower: This five-stage steel mast from Larson Electronics is designed to allow operators to quickly and safely deploy equipment in locations where it must be elevated to heights up to 30` for effective coverage. This light boom can be extended to 30 feet for maximum area coverage and collapsed for applications where a smaller footprint is required. In a collapsed position, the tower is towable on roads and is capable of clearing standard bridges. The mast extends to its full height using an included electric winch.
A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the equipment. The LM series of towers are powder coated with glossy blue finish for corrosion resistance and aesthetics.
The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These components can be extended 2` out from the side of the trailer for added stability. When collapsed, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised.
Solar Panel Assembly: This unit is comprised of two 300-watt solar panels, generating a total maximum output of 0.6 KW. The panels are mounted to a stationary assembly. The panels are wired to the solar charger control box which manages the charging system. The solar panels are mounted to a frame angled at 45° to capture the intensity of the sun for optimized light intake.
Batteries: The solar unit contains a battery bank that consists of fifteen, 40aH lithium-ion batteries for a 600aH battery bank (600aH usable). Compared to conventional SLA batteries, these units are 100% usable and lighter in weight. Over time, this results in lower operating and maintenance costs. An included battery level indicator that provides real-time power monitoring for the battery bank.
Solar Charge Controller: The solar-powered system features a 40A MPPT solar charge controller.
Battery Charger: This system comes with a 120V battery charger, which can be plugged into a local wall outlet during use, such as prior to deployment or when local power is available at the remote site. We can add a 220V or 240V battery charger to power additional equipment from the solar tower at an additional cost (portable battery chargers are also available).
Inverter: This unit comes with a 600-watt inverter, which operates on 120V.
Backup Generator: This unit has a 4kw backup diesel generator with a 30-gallon fuel tank. We offer models with gasoline, LPG/LNG or diesel backup gensets (may come with additional costs). An auto start feature automatically activates the backup generator when the battery bank reaches below 30% capacity. Automatic notification about the generator's status can be sent via SMS or email. For systems with battery chargers and backup generators, the battery charger is connected to the genset by default. It is possible to unplug the battery charger from the generator for local charging.
Component Control Center: All the electrical components are encapsulated in a NEMA 3R job box that is bolted to the trailer. Since most of these components are not rated for high heat, our component cooling system circulates air within the job box at 1400 CFM when the ambient temperature exceeds 90 degrees Fahrenheit. The job box that contains the component control system includes locks for security purposes.
Trailer Assembly: The entire assembly is mounted to a 10` (trailer length) x 10` (trailer bed) x 14` (tow length), single axle trailer via six 1/2" anchor bolts. Trailer length refers to the measurement from the hitch to the rear bumper. The trailer bed refers to deck space that holds system components and equipment (not including tires, hitch, bumper and external trailer components). This two-wheel trailer is equipped with 3,500 lbs axle and leaf springs with 15" trailer tires. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. The trailer tongue can be folded up for seamless storage. A rugged and waterproof job box is included, safely secured to the trailer. Leveling jacks on the trailer allow operators to level the trailer, and provide stabilization during deployment. All trailer lighting complies with DOT/FMVSS regulations.
Outriggers vs Leveling Jacks: The solar-powered system features manual-crank leveling jacks. Outriggers help expand the surface area for large equipment or loads. This differs from leveling jacks that are used to stabilize or level systems. Leveling jacks can be mounted to outrigger legs (or the side of the trailer).
Applications: Live events, law enforcement, military, commercial, industrial facilities, outdoor surveillance, remote locations and more.
|